Breckwell Outer Burn Pot: A-S-OUTER

Replacement burnpot for Breckwell pellet stoves. This is the same as the A-S-BURNPOT just without the stainless steel insert. This burnpot fits most of the newer stoves that have an igniter. Breckwell Burnpot Assembly. 
Not sure if this is the correct burnpot? Take out your old burnpot and measure the distance between the holes. The A-S-Burnpot has a 1/2″ (roughly) gap between the holes. Only one hole on the back? You need an A-S-Burnpotni (no igniter hole). If you have a 1″ gap, then you need the A-S-BurnpotP2K.
This is the new two-piece style burnpot. It replaces the old solid one-piece burnpots. The new style lasts much longer. When the insert burns out, you replace onlythat part.
Fits the following models:

• P22 – 1994 models and newer
• P23 – 1994 models and newer
• P24 – 1994 models and newer
• P32 – All Models
• P1000 – All Models
• P2000F – 2003 models and newer – see notes below
• P2000I – 2002 models and newer – see notes below
• P2700 – 2001 models and newer – see notes below
• P4000 – All Models

If you’re replacing your cast iron burn pot with the stainless steel (Burnpot SS) you will need this part.

Replacement For Part Numbers:

• A-S-OUTER
• 69964

View Compatible Models